Product introduction

The material from the hopper or feeder free falling into the metal separator, if there is no metallic impurity, raw materials directly go through the metal separator to the lower end of the material outlet, If the detector detects containing metal materials, metal particles will change the detection coil originally generated high frequency electromagnetic field, the control computer calculates the signal and send a pulse signal to reject device electromagnetic valve and the cylinder, the actuating cylinder to immediately start the reject flap which will discharge metal particles and a part of raw materials with oriented to side of the mouth, and then reject flap will quickly restore to normal position, reject flap speed is adjustable.

Fast separating all the metals from the material.

◆ The minimum detectable diameter of the metals can be as small as 0.2mm.

◆ Compact design, easy to install and simple to operate.

◆ Mount directly on injection moulding machine or extruder hoppers to protect facilities from the damage caused by hard metals.

◆ Standard equipped with a 12 litres hopper.

◆ Specific size of hoppers and floor stands can be customized to meet any requirement.